HHE 2022-2023

1048 Twenty One B222 SCREWLOCK PART NUMBER SIZE PRICE BL-B222-10ML 10 ml £8.84 BL-B222/25ML 25 ml £18.87 BL-B222C-25ML 25 ml CLAM £21.42 BL-B222/50ML 50 ml £37.77 BL-B222C-50ML 50 ml CLAM £40.32 BL-B222-250ML 250 ml £168.91 B243 NUTLOCK PART NUMBER SIZE PRICE BL-B243-10ML 10 ml £8.84 BL-B243/25ML 25 ml £18.87 BL-B243C-25ML 25 ml CLAM £21.42 BL-B243/50ML 50 ml £37.77 BL-B243C-50ML 50 ml CLAM £40.32 BL-B243-250ML 250 ml £168.91 B574 INSTANT GASKET PART NUMBER SIZE PRICE BL-B574/50ML 50 ml £24.14 BL-B574C-50ML 50 ml CLAM £26.62 BL-B574/250ML 250 ml £153.00 B270 STUDLOCK PART NUMBER SIZE PRICE BL-B270-10ML 10 ml £8.84 BL-B270/25ML 25 ml £18.87 BL-B270C-25ML 25 ml CLAM £21.42 BL-B270/50ML 50 ml £37.77 BL-B270C-50ML 50 ml CLAM £40.32 BL-B270-250ML 250 ml £168.91 New Additions B542 HYDRAULIC SEAL PART NUMBER SIZE PRICE BL-B542/10ML 10 ml £8.84 BL-B542/25ML 25 ml £18.87 BL-B542C-25ML 25 ml CLAM £21.42 BL-B542/50ML 50 ml £37.77 BL-B542C-50ML 50 ml CLAM £40.32 BL-B542/250ML 250 ml £168.91 New Additions B603 RETAINER PART NUMBER SIZE PRICE BL-B603/10ML 10 ml £8.84 BL-B603/50ML 50 ml £37.77 BL-B603/250ML 250 ml £168.91 3010 3010 3010 3010 3010 3010 ADHESIVES & SEALANTS SPECIFICATIONS Strength Low Breakaway torque M10 bolts 6 Nm Service temperature range -55°C to +150°C Viscosity Brookfield 900 – 1500 cps Colour Purple Max. thread size M6 B222 SCREWLOCK B222 is ideal for low-strength threadlocking of adjusting screws, counter- sunk head screws and set screws, very good on low strength metals which could break during disassembly. SPECIFICATIONS Strength Medium Breakaway torque M10 bolts 15Nm Service temperature range -55°C to +150°C Viscosity Brookfield 400 – 800 cps Colour Brown Max Thread size M36 B542 HYDRAULIC SEAL B542 is a medium strength, fast curing Hydraulic Thread Sealant. Provides an instant low-pressure seal and is resistant to fuel, oil, coolants, and hydraulic fluids. SPECIFICATIONS Strength Medium Breakaway torque M10 bolts 25 Nm Service temperature range -55°C to +180°C Viscosity Brookfield 2500 – 3000 cps Colour Blue Max Thread size M6 – M20 B243 NUTLOCK B243 is a blue medium strength oil tolerant general purpose threadlocking anaerobic, designed to be used on parts in an “as received” condition, such as those with protective films (engine oils, cutting fluids and corrosion prevention), etc. SPECIFICATIONS Strength Medium Service temperature range -55°C to +150°C Viscosity Brookfield 30,000 – 50,000 cps Colour Orange Gap fill 0.3 mm Shear strength 5 – 8.5 N/mm 2 B574 INSTANT GASKET B574 is an instant gasket material that forms in place, making almost any size and shape, replacing paper, cork, etc. It eliminates relaxation and loads loss. The assembled parts are usually suitable for immediate low pressure (6 bar) service and once cured, can resist 350 bar pressure, depending on gap size. SPECIFICATIONS Strength High Breakaway torque M10 bolts >33 Nm Service temperature range -55°C to +180°C Viscosity Brookfield 400 – 600 cps Colour Green Max. thread size M20 B270 STUDLOCK B270 Studlock is a permanent, green coloured, general purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1”, sealing against leakage and corrosion. It is chemical resistant, resisting fuels, lubricants and most industrial liquids and gases. B603 RETAINER B603 is an oil tolerant retainer and is designed for direct application onto parts where a light oily film exists or where surrounding parts’ contamination is a problem in maintenance. SPECIFICATIONS Strength High Shear strength >22 N/mm 2 Service temperature range -55°C to +150°C Viscosity Brookfield 100 – 150 cps Colour Green Gap fill 0.15 mm ANAEROBICS