HHE 2022-2023

115500 Three SPECIFICATIONS Pressure range 0 – 16 bar (0 – 230 psi) Supply voltage options 115 V AC or 230 V AC 50/60Hz. (please state) Medium temperature 1 – 100°C Ambient temperature 1 – 50°C Illuminated LCD display Indicating day, time, valve status, battery life Programmable options Week planner, max. 100 switching points, to be distributed over 1-7 days Valve housing material Brass nickel plated Serviceable valve Yes Manual override Yes Remote controllable Yes Environmental protection IP54 (NEMA13) FEATURES / BENEFITS • No unnecessary compressor start-up during periods when compressed air is not required • Compressor, dryer and filter activities are reduced during factory closing hours • At least one air receiver’s worth of compressed air savings per day • Possibility to shut off parts of the pipe line system where compressed air is not needed continuously • Battery saves the installation set-up during power failure • Up to 16 bar • Slow valve opening to avoid hammer strike in pipe line system • Time programmed or remote controlled • Fully automatic: maintenance free • Alkaline batteries protecting the programme • Micro-Processor controlled (multi-cycle 7 day programme) • Large LCD display showing programme cycle and current time • Compact design: easy to install COMPRESSED AIR ENERGY SAVERS CONDENSATE MANAGEMENT DESCRIPTION For years the AIR-SAVER has helped end users to save valuable compressed air from escaping unnecessarily, reducing compressor running hours and thus extending its lifetime, saving energy and operating costs. The AIR-SAVER is typically installed on the air outlet of the air receiver. Alternatively, it is applied in larger factories to close off certain parts of the compressed air system, where during certain parts of the day no compressed air is required. A typical compressed air system has air loss 24 hours per day through pipe works connections and leaking float type drains, etc. By installing an AIR-SAVER, the end user will limit these types of air losses to the operating hours only. At the end of the working day, the AIR-SAVER will close off the air flow and prevent further loss of valuable compressed air. AIR-SAVER G1 COMPRESSED AIR ENERGY SAVER PART NUMBER INLET / OUTLET OPENING / CLOSING DURATION PRICE JORC7005 1” BSP 30 sec. / 90° £343.81 AIR-SAVER G2 COMPRESSED AIR ENERGY SAVER PART NUMBER INLET / OUTLET OPENING / CLOSING DURATION PRICE JORC7007 2” BSP 105 sec. / 90° £823.01 7720 7720 AIR-SAVER LIGHT SWITCH DESCRIPTION The AIR-SAVER-LS helps end-users to save valuable compressed air from escaping unnecessarily, reducing compressor running hours and thus extending its lifetime, saving energy and operating costs. The AIR-SAVER-LS (Light Switch) is installed in the compressed air line after the air receiver. The AIR- SAVER-LS is controlled via an internal relay which is connected to an external switch and separate power supply. A typical installation example is to connect the AIR-SAVER-LS to a light switch. By switching on the lights in the production area, the AIR-SAVER-LS will subsequently open. The saved compressed air flows into the factory compressed air line and the compressor kicks in to produce the air needed to fill the system. At the end of the work- shift you switch off the light(s) and the AIR-SAVER-LS will close accordingly. The AIR-SAVER is also available as a time controlled option with a week programming feature. This version allows you to set the open and closed position according to customer specific demands. New AIR-SAVER-LS G1 COMPRESSED AIR ENERGY SAVER PART NUMBER INLET / OUTLET OPENING / CLOSING DURATION PRICE JORC7005LS 1” BSP 30 sec. / 90° £306.64 7720 New AIR-SAVER-LS G2 COMPRESSED AIR ENERGY SAVER PART NUMBER INLET / OUTLET OPENING / CLOSING DURATION PRICE JORC7007LS 2” BSP 105 sec. / 90° £773.89 7720 SPECIFICATIONS System pressure 0 – 16 bar (0 – 230 psi) Medium temperature 1 to 100°C Ambient temperature 1 to 50°C Supply voltage options 115 V AC or 230 V AC 50/60Hz. (please state) Power consumption Approx. 7W during cycle rotation Enclosure protection rating NEMA13 (IP54) Relay switch 115 V AC ot 230 V AC Valve housing material Brass valve, nickel plated Manual override Yes FEATURES / BENEFITS • At least one air receiver’s worth of compressed air savings per day • No unnecessary compressor start-up during periods when compressed air is not required • Compressor, dryer and filter activities are avoided during factory closing hours • Manual valve opening and closing possible, in case of a power failure • Very quick and easy to connect to an external (light) switch • Slow valve opening to avoid “water hammer” in pipe line system • Brass valve, nickel plated • Compact design - Easy to install