HHE 2022-2023

115577 Three CONDENSATE MANAGEMENT SPECIFICATIONS Max. compressor capacity Any size Pressure range 0 – 40 bar (0 – 600 psi) Supply voltage options 24 V DC, 115 V AC and 230 V AC 50/60Hz. (please state) Medium temperature 1 – 60 °C Ambient temperature 1 – 55 °C Timer cycle range (on / off) 7 seconds to 15 minutes ON / 4 minutes to 24 hours OFF Actuator PCB SMD technology, ensuring consistency in production Timer cycle indication Bright LED illumination, LED programme indicator Test feature Yes Valve type 2/2 way, motorised ball valve Valve orifice 12 mm Valve seals FPM and Teflon Inlet / outlet connections 1/2″ (BSP or NPT) Inlet connection height 1.0 cm Serviceable valve Yes Valve housing material Brass nickel plated, ball valve stainless steel Power connection Cable and plug Environmental protection IP65 (NEMA4) Remote switch option Yes FEATURES / BENEFITS • Stainless steel ball valve, offering you crushing power • Digital cycle display, offering you a visual display of drain status • Large (full bore) 12 mm orifice, offering you a drain that cannot block • Does not air-lock during operation • For compressed air applications up to 40 bar • Suitable for all types of compressed air systems with a high contamination of its condensate (rust, scale) • TEST (micro-switch) feature • Micro-processor controlled (high level of time cycle accuracy) • Medium pressure up to 40 bar • Remote control – optional SPECIFICATIONS Max. compressor capacity 70 CFM (2 m³/min) Max. oil adsorption in the elements 2 litres High performance white element 1 Activated carbon element 1 Inlet connection 1/2” Outlet connection 1/2” Test valve Yes Housing material ABS Housing colour Black Lid colour Grey Test kit included Yes Target oil residue output value <10 ppm Inlet and outlet hose pipe connectors Included Mineral lubricants Yes Synthetic lubricants Yes Stabile condensate emulsions Yes Polyglycol, Roto-Inject, Sigma Mol* Yes DIBt certificate Yes, referred to as PURO-CT 2 FEATURES / BENEFITS • Maximum compressor capacity 70 CFM (2 m³/min) • High performance filtration materials applied • Simple, fast and clean installation and maintenance procedure • Successful separation of mineral oil, synthetic lubricants and stable emulsions • Fixing bracket included for wall mounting • Brass hose connections for quick and easy installation / servicing • Operates with all JORC type drains (both timer controlled and level sensed) UNBLOCKABLE MOTORISED BALL VALVE DRAINS OIL / WATER SEPARATORS DESCRIPTION The TEC-44 is a microprocessor operated ball valve, designed to remove condensate from deliquescent dryers, rusty old tanks, vessels and refrigerated dryers. The TEC-44 is a powerful, timer controlled, motorised ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. The TEC-44 is designed to remove heavy contaminated condensate up to pressure ratings of 40 bar. This condensate drain cannot be blocked and is applied where all else fails. Draining applications with a high level of contamination (rust, scale, etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerful ball valve rotation and large orifice. DESCRIPTION The SEPREMIUM 2 drops into its holding bracket (supplied as standard). Servicing involves disconnecting the inlet and outlet, removing the separator and placing the new unit in the holding bracket. TEC-44 UNBLOCKABLE MOTORISED BALL VALVE DRAIN PART NUMBER VOLTAGE CONNECTION PRICE JORC4008 230 V AC 1/2” BSPP £311.95 JORC4028 115 V AC 1/2” BSPP £311.95 7720 SEPREMIUM 2 DISPOSABLE OIL / WATER SEPARATOR PART NUMBER COMPRESSOR CAPACITY ELEMENT OIL ADSORPTION PRICE JORC9602 70 CFM (2 m³/min) 2 litres £132.74 7720 SERVICE UNIT WITHOUT BRACKET PART NUMBER FOR USE WITH PRICE JORC9602WB SEPREMIUM 2 £119.49 7720 *Please contact your distributor for special elements and/or 24/7 applications. Roto-Inject and Sigma Mol are registered trade names of producers of compressor lubricants.