HHE 2022-2023

174 Four CEJN SERIES 218 FEMALE THREAD PART NUMBER CONNECTION PRICE C102181234 3/8” BSPP £174.50 C102181434 3/8” NPT £174.50 CEJN SERIES 218 FEMALE THREAD PART NUMBER CONNECTION PRICE C102186204 3/8” BSPP £124.60 C102186404 3/8” NPT £124.60 105 105 ULTRA HIGH PRESSURE – 218 SERIES COUPLINGS NIPPLES SPECIFICATIONS Nominal flow diameter 4.5 mm (11/64”) Flow capacity 15.0 l/min (3.3 GPM UK) Max. working pressure 1000 bar Min. burst pressure 2800 bar Temperature range -30°C to +100°C (-22°F to +212°F) Coupling material Hardened, zinc chromate plated steel Nipple material Hardened, zinc chromate plated steel Seal material Nitrile (NBR) FEATURES BENEFITS • Extremely high flow • Safety ring design on the locking sleeve • Plastic dust caps as standard • Very efficient • Non drip connection and disconnection • Security against involuntary disconnection The range of CEJN high pressure hose is like the rest of the CEJN product range – a testament to quality and performance. Only the best is sold under the CEJN brand and this range is clearly part of that tradition. The range contains four hoses with different pressure ratings up to 250 MPa. With a large variety of fittings to choose from, hose kits can be assembled to meet almost all requests. PRE-ASSEMBLED HOSE KITS PRESSURE TESTED AND READY TO USE For more information and prices, please ask your distributor CEJN 700 CEJN 1000 CEJN 1800 CEJN 2500 Part no. Hose Hose – Twin design C199510701 (Red) C199510710 (Red/Yellow) C199511001 (Black) C199511010 (Red/Blue) C199511801 (Blue) - C199512501 (Red) - Design: Inner tube of polyamide (PA), 2 spiral layers of high tensile steel wire, 2 open spiral synthetic fibre, outer sheath of polyurethane (PUR) Inner tube of polyamide (PA), 4 layers of spiral wound steel wire, outer sheath of polyurethane (PUR) Inner tube of polyoxymethylene (POM), 4 spiral layers of high tensile steel wire, outer sheath of polyamide (PA) Inner tube of polyoxymethylene (POM), 6 spiral layers of high tensile steel wire, outer sheath of polyamide (PA) Max. working pressure: 70 MPa (10150 psi) 100 MPa (14500 psi) 180 MPa (26100 psi) 250 MPa (36250 psi) Min. burst pressure: 186 MPa (26970 psi) 320 MPa (46600 psi) 450 MPa (65250 psi) 625 MPa (90620 psi) I.D. x O.D.: 6.3 x 12.4 mm 6.3 x 13.3 mm 4.7 x 11.5 mm 4.7 x 13.0 mm Min. bend radius: 70 mm 80 mm 130 mm 175 mm Weight: 190 g/m 305 g/m 280 g/m 410 g/m Temperature range: -40°C to +100°C -40°C to +100°C -40°C to +100°C -40°C to +100°C Other information: Other colours upon request ADVANTAGES • Ultra-high working pressures • Maintained flexibility throughout entire service life • Low volumetric expansion • Smooth inner bores • Kink resistant, steel reinforced construction • Abrasion resistant covers • Small outside diameter • Superior chemical resistance BENEFITS The CEJN high-pressure hose is a spiralised, steel reinforced, polymer hose that picks up where conventional product capabilities stop. It gives you an ultra-high working pressure, with maintained flexibility throughout its entire life. Its low volumetric expansion gives fast response time in hydraulic systems, while the smooth inner bores provide a minimised pressure drop. A long lasting service time and extended hose life, in even the toughest applications, is a result of the kink resistant steel reinforced construction, abrasion resistant covers and a superior chemical resistance. The small outside diameter makes the hose ideal for tight routing. ULTRA HIGH PRESSURE HYDRAULIC HOSE – 951 SERIES Nipple not to be pressurised in disconnected position Double Shut-off Not actual size