HHE 2022-2023

303 Five TEST POINT PRODUCTS MINIMESS ® GAS CHARGING VALVES ACCUMULATOR GAS CHARGING & TESTING KITS SPECIFICATIONS Working temperature range -20°C to +135°C (-4°F to +275°F) Max. working pressure 630 bar FEATURES • Compatible with inert gases, nitrogen and compressed air • Resistant against antifreeze, oil, anti-corrosion oil, grease and fuel • Internal primary and secondary sealing as well as integral seat seal and anti-vibration O-ring (to prevent loosening of the metal cap) made of Viton ™ • Gas charging valve must be rinsed and cleaned before using oxygen GAS CHARGING VALVE MALE PART NUMBER THREAD SEALING FORM PRICE HTP2402-01-18.00 1/4” BSPP Form F £62.90 HTP2402-01-79.00 1/2” – 20 UNF Form F £60.44 8400 FEATURES • Safe & easy to use Minimess charging & testing connections • Connects to most types of bladder accumulator valve • Minimess test points offer excellent system access versatility • Simple hand tightening hose connection on to charging valves • Low cost solution for charging of different accumulator valves • Safely test, charge or bleed • Test or charge using Hydrotechnik Minimess connections up to 630 bar • Simple hand tightening hose connection on to accumulator charging device • Compact accumulator charging device • Connection options for most popular bladder accumulator charging valves • Economically priced KIT CONTENTS • Valve body complete with 5/8”-18 UNF female ring nut connection to accumulator gas valve, with bleed and Minimess charging hose connection • Accumulator charging valve adaptors to 7/8”-14 UNF female, (short thread), 5/16”-32 UNEF (VG8) female (short thread) and 1/4” BSP female (with pin) • 2.5m long high pressure microbore flexible hose complete with Minimess connections • Two pressure gauges (60 bar and 250 bar) • 5/8” BSP male bullnose adaptor to connect to nitrogen bottle with Minimess ® charging hose connection • Set of spare gaskets • Carrying case ACCUMULATOR GAS CHARGING & TESTING KIT COMPACT KIT PART NUMBER DESCRIPTION PRICE HTPPC280/70-D Accumulator charging and testing kit typically used for charging bladder accumulators with nitrogen as well as pressure checking and pressure adjustment. £475.29 FEATURES • Safe & easy to use Minimess charging & testing connections • Safely test, charge or bleed • Connects to most types of bladder, diaphragm & piston accumulator valves • Minimess test points offer excellent system access versatility • Simple hand tightening hose connection on to charging valves • Low cost solution for testing & charging of a wide range of accumulators • Test or charge using Hydrotechnik Minimess connections up to 630 bar • Simple hand tightening hose connection on to accumulator charging device • Connection options for most popular accumulator charging valves • Economically priced KIT CONTENTS • Valve body complete with M28x1.5 female ring nut connection to accumulator gas valve, with bleed and Minimess charging hose connection • Accumulator charging valve adaptors to 7/8”-14 UNF female, (short & long thread), 5/16”-32 UNEF (VG8) female (short & long thread) and 1/4” BSP female (with pin) • 2.5m long high pressure Minimess microbore flexible charging hose • Two pressure gauges (60 bar and 250 bar) • 5/8” BSP male bullnose adaptor to connect to nitrogen bottle with Minimess charging hose connection • Set of spare gaskets • Carrying case ACCUMULATOR GAS CHARGING & TESTING KIT STANDARD KIT PART NUMBER DESCRIPTION PRICE HTPPCFPU280/70-U Gas charging kit for bladder, diaphragm or piston accumulators with nitrogen or to check or reduce existing precharge pressure in accumulators. £794.77 8400 8400 DESCRIPTION Accumulator charging and testing kit used for charging bladder accumulators with nitrogen as well as pressure checking and pressure adjustment.