HHE 2022-2023

306 Five FLOAT SWITCHES, HEAT EXCHANGERS & HEATERS FLOAT LEVEL SWITCHES 1 SWITCH CONTACT PART NUMBER CONNECTION LENGTH PRICE HFP-HBE-1424 1” 200 mm £108.77 HFP-HBE-1428 1” 300 mm £114.65 HFP-HBE-1432 1” 400 mm £124.06 HFP-HBE-1434 1” 500 mm £124.06 8445 SPECIFICATIONS Maximum temperature 80°C Protection IP 65 Hysteresis 2 – 3 mm Maximum voltage 250 V AC Maximum switch current Level 1.3 A Power AC/DC 80 W / VA MATERIALS Stem Brass Float Nylon FEATURES • Electrical level supervision • Appropriate for mineral oil, diesel and benzine • 1 switch contact • Electrical circuit for level, min / max • Standard version level max = contact open FLOAT LEVEL SWITCHES HEAT EXCHANGERS OIL / WATER PART NUMBER CONNECTION BSPP COOLING CAPACITY PRESSURE PRICE OIL WATER HFP-HBE-000378 3/4” 3/4” 0-10 kW 32 bar £462.61 HFP-HBE-000379 3/4” 3/4” 5-16 kW 32 bar £520.32 HFP-HBE-050747 1” 3/4” 10-25 kW 16 bar £956.78 HFP-HBE-050748 1” 3/4” 20-40 kW 16 bar £1300.86 HFP-HBE-083347 1 1/4” 3/4” 35-60 kW 32 bar £1029.89 HFP-HBE-083348 1 1/4” 3/4” 50-85 kW 32 bar £1258.90 HFP-HBE-000396 1 1/2” 1” 80-150 kW 16 bar £2299.31 8445 IMMERSION HEATERS 240 V PART NUMBER POWER LENGTH PRICE HFP-HBE-1960 250 W 200 mm £808.21 HFP-HBE-1961 500 W 300 mm £860.55 HFP-HBE-1962 1000 W 500 mm £908.18 8445 SPECIFICATIONS Working temperature range -196°C to +225°C Working pressure See table MATERIALS Cover plates & connections 304 stainless steel Plates 316 stainless steel Brazing material Copper FEATURES • High pressure operation • High temperature operation • Sturdy connection blocks, brazed on the plate-heat-exchanger • Cooling capacity from 5 to 360 kW • DOC ® Series coolers are suitable for most industrial hydraulic applications • Due to the brazed contact points between the plates the cooler has a very sturdy design – this allows best possible resistance against high operating pressures • The sturdy connection blocks allow high fastening torques for assembling SPECIFICATIONS Temperature resistance Up to -20°C MATERIALS Heating element protection tubes Stainless steel Cable connection Brass FEATURES • Pre-heating of the medium by direct heating • Stable welded version • Easy installation • No lateral tank machining • Low minimum oil level in horizontal position • Pick up of iron particles with integrated magnetic clamps • Protection class IP 68 • Integrated thermostat with switch-off temperature (+40°C) • Integrated temperature limiter, wired for direct switching • 3 pole, 4 m long cable with screwed cable gland M16 • Resistant against HLP and HFA fluids, diesel, heating and vegetable oil PLATE HEAT EXCHANGERS FOR HYDRAULICS VR IMMERSION HEATERS WITH MAGNETIC CLAMP