HHE 2022-2023

508 Ten PARKAIR 399 SERIES NIPPLE TO BSPT MALE 0.5 METRE LENGTH PART NUMBER PRICE per assy H-GP08L399 8.0 5/16 1/4 20 £25.65 H-GP10L399 10.0 3/8 3/8 20 £27.45 PARKAIR 19 SERIES NIPPLE TO BSPT MALE 0.5 METRE LENGTH PART NUMBER PRICE per assy H-GP06L19 6.3 1/4 1/4 20 £23.86 H-GP08L19 8.0 5/16 1/4 20 £25.65 H-GP10L19 10.0 3/8 3/8 20 £27.45 CEJN 320 SERIES NIPPLE TO BSPT MALE 0.5 METRE LENGTH PART NUMBER PRICE per assy H-GP06L320 6.0 1/4 1/4 20 £27.00 H-GP08L320 8.0 5/16 1/4 20 £29.06 H-GP10L320 10.0 3/8 3/8 20 £29.96 H-GP13L320 12.5 1/2 1/2 20 £28.70 CEJN 410 SERIES NIPPLE TO BSPT MALE 0.5 METRE LENGTH PART NUMBER PRICE per assy H-GP13L410 12.5 1/2 1/2 20 £37.67 H-GP19L410 19.0 3/4 3/4 20 £48.44 1350 1350 1350 1350 HOSE ASSEMBLIES & WHIPCHECK SPECIFICATIONS Temperature range -30°C to +60°C Pressure rating Values given are based on the short term burst pressure of H-GP hose at 20°C using a 3:1 safety factor. NOTE: Any increase in temperature above 20°C will result in a decline in the working pressure values. Construction Flexible TPE inner tube, reinforced with high tensile polyester nylon braid, covered with flexible TPE cover. Fitted with a nipple and male BSPT end fitting. SUITABILITY FEATURES / BENEFITS • Compressed air • Significantly reduces wear and tear on the coupling • Minimises the whip action when disconnecting GP1 RUBBER ALLOY HOSE WHIP ASSEMBLIES SPECIFICATIONS Max. working pressure 13.8 bar (200 psi) FEATURES These strong steel cables help prevent hose whip in case of accidental separation of coupling or clamp device. The safety cable reaches across the hose fittings to provide stand by safety for the hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose. Thoroughly tested with years of proven service. WHIPCHECK SAFETY CABLE PART NUMBER CABLE SIZE APPROX. LENGTH PRICE AH-WCK-1 1/8” 1/2” – 1 1/4” 22” £9.07 AH-WCK-2 1/4” 1 1/2” – 3” 39” £20.99 910 WHIPCHECK – A POSITIVE SAFEGUARD FOR HOSE CONNECTIONS You may also need ... ... on page 223, section 4 Malleable clamps